菲律賓移動離心式滾筒篩淘金設備

【菲律賓移動離心式滾筒篩淘金設備流程概述】Technical process
　　原料通過工程車輛送入進料斗,，首先篩分出較大不合格的物料,，細料通過高壓水反沖均勻進入多鉸刀鏈條驅動式滾筒篩內，通過滾筒篩內多條鉸刀把成團粘泥絞散,，中央供水管道永遠朝向下部對物料進行充分沖洗將粘泥沖走,，然后篩分為 6mm 以上與 6mm 以下兩種規格。其中 6mm 以上物料排入一條固定溜槽進行大顆粒礦物提取回收后,，廢料排入廢料區域,，回收率達到 90% 以上,；
6mm 以下物料排入料箱內通過一臺沙泵打入臥式全自動排礦離心機內進行精選(沙泵供料能夠保證進料濃度在 30%以下，并且對物料進行二次清洗,，極大提高回收率),，小于 6mm 以下的礦物會在臥式自動排放離心機通過 PLC 電腦控制下自動排入精料箱內，廢料自動排出到廢料區域,。
　　The raw material into feed hopper by excavator,then swilled by high pressure water into reamers trommel screen and to be making the caly into mixture with water,the central water swilling and take the clay off, it to be classified into 2size＞6mm and ≤ 6mm,the material ＞6mm into one fixed sluice to get nugget,the scrap get rid into the scrap pool;
The material ≤6mm into horizontal automatic centrifuge concentrator by one set 4inch sand pump which can control the concentration below 30% and also the 2nd washing to mineral efficiently,finally the concentrate automatic discharged and scrap getting
rid into scrap pool.

菲律賓移動離心式滾筒篩淘金設備方案效果圖：

菲律賓移動離心式滾筒篩淘金設備

新型移動離心選淘金設備

菲律賓移動離心式滾筒篩淘金設備為一體式移動離心選礦設備,，原礦處理量每小時 50-100 噸(6mm 以下物料離心機處理量 15-30 噸/時)，本套移動選礦設備結構設計緊湊,、故障率低,，其結構如下：
This set of equipment is integrated mobile centrifugal dressing equipment, raw ore processing capacity of 50-100 tons per hour (below 6mm material centrifuge processing capacity of 15-30 tons/hour), this set of mobile dressing equipment structure design compact, low failure rate, its structure is as follows:

1、進料系統 Feeding system 進料系統為雙層結構,，上層為液壓式可變角度篦條篩,，下層采用大溜槽進料，采用高壓水反沖系統,，可以保證均勻進料,； The feeding system is double layer structure, the upper layer is hydraulic variable Angle grate screen, the
lower layer adopts big chute feeding, high pressure water recoil system, can ensure uniform feeding;

2、絞洗式篩分系統 Wringing and washing screen system 滾筒篩動力采用鏈條驅動設計,，動能傳遞均勻,、傳遞效率高；滾筒篩內含多條鉸刀從頭部覆蓋至尾部,，能夠?qū)ξ锪线M行充分絞洗脫泥,，極大的提高了篩分與選礦作業效率；滾筒篩供水系統采用中央供水+側供水方式,，中央供水定向沖洗滾筒篩底部物料,，側供水負責沖洗外層篩網。
Roller screen power using chain drive design, kinetic energy transfer uniform, high transfer efficiency;
The roller screen contains a number of reamers from the head to the tail cover, can fully wring and elution of the material, greatly improving the efficiency of screening and mineral processing operations;
The drum screen water supply system adopts the central water supply + side water supply mode, the central water supply is directed to flush the material at the bottom of the drum screen, and the side water supply is responsible for washing the outer screen.

3,、選礦系統 Beneficiation system 選礦系統采用臥式全自動排礦離心機進行選礦,，保證使用壽命與回收率；
離心機采一臺 80#臥式全自動排礦離心機,，該機采用 PLC 電腦全自動控制,，與立式離心機相比具有以下優勢：
Mineral processing system adopts horizontal automatic ore discharging centrifuge for mineral processing to ensure service life and recovery rate;

4、供水系統 Water supply system
本機自帶分水器,，工作時只需要將進水管道連接至分水器即可開始正常工作,。
The machine has its own water distributor, when working, only need to connect the water inlet pipe to the water distributor can start normal work.

5、移動系統 Mobile systems
移動系統部件由底盤與牽引轉向兩大部件組成,，底盤采用 25#工字鋼梁自主設計,，保證設備強度，4 軸 8 條實芯工程輪胎,，4 條液壓支腿支撐臥式全自動排礦離心機,，可以使用裝載機等設備進行牽引,，輕松移動至工作場地。
The moving system is composed of chassis and traction steering. The chassis adopts 25# I-beam independent design to ensure the strength of the equipment. The chassis adopts 8 solid core engineering tires with 4 shafts and 4 hydraulic legs to support horizontal automatic ore discharge centrifuges.

菲律賓移動離心式滾筒篩淘金設備配置冠誠重工生產研發的新型高效環保離心機,，全程只用水和電,，對環境無污染，是一款友好的金礦提取設備,。

新型移動離心選淘金設備

離心式滾筒篩淘金設備

Centrifuge mining an 80# horizontal automatic ore discharging centrifuge, the machine adopts PLC computer automatic control, compared with the vertical centrifuge has the following advantages:

	臥式全自動排礦離心機	立式手動排礦離心機
控制方式	PLC 電腦全自動控制	人工手動控制
卸礦方式	自動	手動
轉子結構	臥式(兩端固定)	立式(下端固定)
穩定性	高(使用壽命高)	低(使用壽命低)
安裝方式	不需要水平硬化基礎	水平硬化基礎
進料方式	沙泵(能控制進料濃度在 30%)	高低落差自流(不能控制進料濃度)
回收率	90%以上	70%
應用于移動設備	能	否
最大型號	1200# 及以上(需要訂制)	80#
	Horizontal centrifuge concentrator	Vertical centrifuge concentrator
The system	PLC conctrol	Handling control
Discharging	Automatic discharge	Handling discharge
The shaft	Horizontal(shaft 2sides fixed)	Vertical(buttom sidefixting)
Working	Long(working life)	Normal(working life)
Installation	No need seeking ground level	Need seeking ground level
Feeding	Sand pump(easily control the feeding concentration 30%)	By gravity feeding(cann’t control the feeding concentration)
Recovery	Above 90%	70%
Application field	Good peformance in jolting surrounding such as mobile mining equipment,dredger etc	Cann’t work in jolting surroundings.
Biggest capacity model	1200# or bigger capacity need customized	80#

菲律賓移動離心式滾筒篩淘金設備技術參數&報價清單 Technical parameters & Quotation list

名稱 Name	規格 Specification	數量 Quantity	功率 Power	備注 Remark
底盤 Chassis	寬度：1.8 米,，長 7.3 米材質：25#工字鋼含牽引&轉向系統 四軸 8 條實芯工程輪胎	1 套	-
進料系統 Feeder System	大溜槽：2100X2800mm 材質：底板&側板 Q235X10mm，外側槽鋼護邊,；液壓式篦條篩：2100X2200mm 材質：框架 120X120 方管,，篦條：?30mm 圓鋼液壓油缸：2 支	1 套	-
滾筒篩 Rotary screen	絞洗式內徑 1.3 米，外徑 1.6 米,，凈篩網長度 1.8 米內含多條鉸刀從頭部覆蓋至尾部；采用鏈條傳動,；電機功率：4KW	1 套	4
臥式離心機 Horizontal centrifuge	80#臥式全自動排礦,，PLC 電腦控制電機功率：5.5KW 空氣壓縮機：3KW	1 套	8.5
離心式清水泵 Acting centrifugal fresh water pump		1 臺	5.5	離心機專用 Centrifugal air compressor oil
沙泵 Sand pump	離心機供料沙泵 4 寸沙泵+11KW 電機	1 套	11
固定溜槽 Fixed chute	寬度 1 米，長 2 米	1 套	-	含淘金氈 Containing gold blanket

液壓支腿 Ydraulic leg			4 支	-
液壓站 Hydraulic pressure station	5.5KW		1 套	5.5
分水器 Water knockout drum			1 套	-	含機器內部供水管道 Including machine internal water supply pipe
配電箱 Distribution box	開關品牌：德力西或正泰		1 套	-	含電機線,，不含電纜線 Including motor line, excluding cable line
總裝機功率 Total installed power	34.5KW（不含給水泵 Do not include feed pump）
出廠價格 ex-factory price (稅前價格,，不含運費，含稅+13%)(Price before tax, freight not included, tax +13%)	50HZ 380V	主設備 Primary device：￥元發電機組 Generator set（100KW 玉柴）：￥元
	60HZ 230V	主設備 Primary device：￥ 0 元